Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pressure vessel mounted on truck

Status
Not open for further replies.

pve5

Mechanical
Sep 13, 2005
44
Pressure vessel used to store yeast is being designed for 2 bar in accordance with ASME Section VIII Div.1.The tank will be used to transfer contents ( yeast ) from one brewery to other brewery. When in use this tank will be stationery.

This tank is for New Brubswick.

Question is that for CRN, do we need to comply with requirements of DOT also.

Thanks in advance


 
Replies continue below

Recommended for you

DOT is for US,
you should contact New Brubswick Dept of Labour,
to register your vessel
genb
 
You may want to check with New Brunswick? department of transportation regarding a pressure vessel on a roadway/highway.

We transport crude oil samples (1000 cc) to the lab, and I believe there are regulations covering that.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor