StudB8
Mechanical
- Dec 14, 2013
- 8
anybody please advice about reference standard for pressure vessels alignment tolerances ..
in most projects i find such tolerances in project specification (1mm/meter length of the vessel with maximum 25mm), but actually i dont
know such tolerances based on which standard..
note: the pressure vessel built according to ASME VIII and will be installed in refinery project in middle east.
anybody help is totally appreciated.
in most projects i find such tolerances in project specification (1mm/meter length of the vessel with maximum 25mm), but actually i dont
know such tolerances based on which standard..
note: the pressure vessel built according to ASME VIII and will be installed in refinery project in middle east.
anybody help is totally appreciated.
