Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Primary Sewage Sludge Pumps

Status
Not open for further replies.

stanier

Mechanical
May 20, 2001
2,442
We are looking for primary sludge pumps to pump 20 L/s 10m 6-8% solids. The application would suit either submersible centrifugal, lobe or other type of pump or perhaps vertically mounted progressive cavity or self priming centrifugal. Sump is 7m deep.

These pumps will pump to the suction of transfer pumps that have to pump to the surface. These can be any style of pump meeting 20 L/s at 110m head with a proven track record for primary municipal sewage sludge.

Eight pump sets are required delivered to East Coast Australia.
 
Replies continue below

Recommended for you

How are you keeping at Weir Engineering?

geoff
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor