Pro/Engineer - config.pro options 1

[willcambridge]

I used to work at a big engineering company where our CAD program, Pro/Engineer, was set up for us by experienced staff. Now I am at a small company where I am the only Pro/E user. I want to configure Pro/E's interface to my preferences and I know I can do this by specifying options in the Pro/E config.pro file. The problem is, even though I know those options exist, I can't find them written down anywhere. Does anyone know where to find a list of Pro/E's configurable options? I'm using Pro/E Wildfire.

Thanks,
Will

 

[Tofflemire]

Hi Will,

This should get you going.

http://www.proesite.com/UTIL/2001_allopt.htm

Tofflemire

 

[Heckler]

Try this link

http://www.proesite.com/newframe.htm?/UTIL/view_config.html

also this thread554-107098

Best Regards,

Heckler
Sr. Mechanical Engineer
SW2005 SP 2.0 & Pro/E 2001
Dell Precision 370
P4 3.6 GHz, 1GB RAM
XP Pro SP2.0
NIVIDA Quadro FX 1400
o
_`\(,_
(_)/ (_)

Do you trust your intuition or go with the flow?

 

[looslib]

From PTC's site, if you have a free account (must be on maintenance).

Complete list of Wildfire config.pro options:

http://www.ptc.com/WCMS/files/22836en_file1.pdf

Search PTC site for rference documents:

http://www.ptc.com/appserver/cs/doc/refdoc.jsp

"Wildfires are dangerous, hard to control, and economically catastrophic."
"Fixed in the next release" should replace "Product First" as the PTC slogan.

Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand

 

[3dlogix]

Try our free config.pro help tool, explains what all options do, and is neatly arranged in a Help File style.

Go to

http://www.3dlogix.com

to get the download. Only for 2001 version, for now. Working on WF2.

Steve

http://www.sprdesign.com

http://www.3dlogix.com

 

[cadcamguy]

I have found the 3DLogix config.pro help tool above a wonderful help, I have had it on my machine for a couple of years now.

So handy just to open it up and find the syntax you need

I am no way affilated with these guys.. I just want to give them a hats-off for creating a great program

I'm sure their WF version will be just as good !!!

 

[3dlogix]

Wsylvester;

Thank you for the nice words. And yes, we are working on the WF2 version, hope to get it out soon. When it does, we will post the information on this forum.

Tnaks again,

Steve

http://www.sprdesign.com

http://www.3dlogix.com