Pro-Engineer to Solidworks

[xtremedesigns]

Hello Fellow PTC Users,

I am really starting to get hit up about Solidworks.... I have customers who are now demanding direct translations of our Pro-e tool design to be converted into Solidworks, with model trees. Does anyne know if 3.0 will do this now or is it once again a ptc rumor?

Thank you in advance!

 

[Heckler]

I import models from Pro/E 2001 to SWx 2005/2006 without any problems using IGES and STEP. I prefer STEP being a little cleaner.

Here is an article I posted in the SWx forum regarding the same topic. The two kernals are different and have different accuracies.

http://multiterra.mooload.com/file..../When+Bad+things+Happen+to+Good+CAD+Users.doc

Best Regards,

Heckler
Sr. Mechanical Engineer
SW2005 SP 5.0 & Pro/E 2001
Dell Precision 370
P4 3.6 GHz, 1GB RAM
XP Pro SP2.0
NVIDIA Quadro FX 1400
o
_`\(,_
(_)/ (_)

Never argue with an idiot. They'll bring you down to their level and beat you with experience every time.

 

[Heckler]

Here is the thread thread559-153121

Best Regards,

Heckler
Sr. Mechanical Engineer
SW2005 SP 5.0 & Pro/E 2001
Dell Precision 370
P4 3.6 GHz, 1GB RAM
XP Pro SP2.0
NVIDIA Quadro FX 1400
o
_`\(,_
(_)/ (_)

Never argue with an idiot. They'll bring you down to their level and beat you with experience every time.