Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pro/ENGINEER Translator

Status
Not open for further replies.
techman007

techman007

Computer
Apr 3, 2001
13
0
0
Does anyone know the reason a ver 7.x C3P license wouldn't have the Pro/E Translator Feature but anything above 8.x C3P of the same license would? Is it because at ver 8.x they combined Artisan w/ Master Series?

Thanks in advance for the info.
 
Status
Not open for further replies.

Similar threads

swale2
  • Locked
  • Question
Deleting Projects or library item
Replies
1
Views
17
swale2
swale2
RomainIdeas
  • Locked
  • Question
I-deas 6.1m2 on Windows 7 - Printing problem
Replies
4
Views
10
RomainIdeas
RomainIdeas
cadcoke5
  • Locked
  • Question
Seek clarification about macro creation process
Replies
3
Views
5
SDETERS
SDETERS
thomasleeclark
  • Locked
  • Question
I-DEAS PDF Printer problems
Replies
0
Views
8
thomasleeclark
thomasleeclark
deacons323
  • Locked
  • Question
NX4 with Windows 7 32-bit: Post Processor not working
Replies
3
Views
5
deacons323
deacons323
Back
Top