problem in operation of AMADA FO 3015NT

[Omar ahmad]

Hi guys,
I have CNC Laser cutting machine (AMADA FO3015NT)
I have a problem in stopping the cutting process and go back to the first cutting line.
I don't know if there is another way to that without make wipe off of G-Code from the PAUSE point up to reach the point of M103 Code
could anyone help me pleas ?

Regards
Omar

 

[drossfree]

after cutting condition call up ex: E3 ;
insert GOTO1 :and just before the m103; insert N1: program should skip to n1 line.
Also Wrong forum

https://www.eng-tips.com/threadminder.cfm?pid=380