Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Problem with geometric pattern

Status
Not open for further replies.

lorenzomilani

Mechanical
Jul 14, 2018
1
Hello everyone, it's the first tutorial with Creo Parametric 5, for the exact I'm following this :

Link

I can successfully do only the first pattern with reference to the axis and using the original non-mirrored rib feature.
I always failed the pattern of mirrored speck, and n the wireframe preview that shows me when I failed, the last element of the pattern mysteriously it is not displayed ( it should be 7 and not 6. in pattern setting I put elements 7 and angle 360/7)
Thanks so much

 
 https://files.engineering.com/getfile.aspx?folder=d023890a-422e-4cc5-94b6-368363585eb5&file=turbina.prt.zip
Status
Not open for further replies.

Part and Inventory Search

Sponsor