Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Problem with mass flow rate to introduce velocity in thermal analysis

Status
Not open for further replies.
aaltuna

aaltuna

Mechanical
Jun 14, 2016
30
Dear,

I am working with thermal analysis and I would like to introduce velocity to the tube.
I am introducing the movement by mass flow rate, defining INPUT and OUTPUT node set. But, I have problem with the convergence.

Any help it would be appreciated.

Regards,

Ane
 
 http://files.engineering.com/getfile.aspx?folder=f0ceda62-d2d5-45ca-84bf-5334f9d8c359&file=Job-12tempMFb.inp
Status
Not open for further replies.

Similar threads

R
  • Question
Creep Analysis in Abaqus
Replies
3
Views
2K
FEA way
FEA way
MPa94
  • Locked
  • Question
Fully coupled thermal-stress analysis in Abaqus/Standard- equations
Replies
8
Views
262
FEA way
FEA way
Saks1235
  • Question
ABAQUS:- Problem with Concentrated AM model Vs Goldak AM model
Replies
5
Views
2K
FEA way
FEA way
rw5
  • Locked
  • Question
mass scaling problem
Replies
6
Views
157
rw5
rw5
Bishal123
  • Locked
  • Question
ABAQUS shear strain rate
Replies
1
Views
179
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom