Oct 6, 2014 #1 LayKanae Industrial Jul 28, 2014 23 0 0 MX Hello everyone! Anyone know how I can enlist rules in the Firewall for using NX license??? Because I can´t turn off the firewell on the server and will not let me connect to a client computer Thank you
Hello everyone! Anyone know how I can enlist rules in the Firewall for using NX license??? Because I can´t turn off the firewell on the server and will not let me connect to a client computer Thank you
Oct 6, 2014 #2 PhoeNX Mechanical Mar 2, 2010 869 0 16 AU You need to edit the license file you are using first. There is a line in there: VENDOR ugslmd Edit it so that you have: VENDOR ugslmd PORT=28005 The 28005 is specifying the second port that the license server uses, so it's fixed and not dynamic. You then need to create firewall rules for ports 28000 and 28005 to allow traffic through on both the server and client systems Anthony Galante Senior Support Engineer NX5.0.6, NX6.0.5, NX7.5.5, NX8.0.0 -> NX8.0.3 NX8.5.0 -> NX8.5.3, NX9.0.0 -> NX9.0.3, NX10 Beta Upvote 0 Downvote
You need to edit the license file you are using first. There is a line in there: VENDOR ugslmd Edit it so that you have: VENDOR ugslmd PORT=28005 The 28005 is specifying the second port that the license server uses, so it's fixed and not dynamic. You then need to create firewall rules for ports 28000 and 28005 to allow traffic through on both the server and client systems Anthony Galante Senior Support Engineer NX5.0.6, NX6.0.5, NX7.5.5, NX8.0.0 -> NX8.0.3 NX8.5.0 -> NX8.5.3, NX9.0.0 -> NX9.0.3, NX10 Beta
Oct 9, 2014 Thread starter #3 LayKanae Industrial Jul 28, 2014 23 0 0 MX Hello PhoeNX Thank you very much for your answer !!!! But I'm not sure how to make the input and output rule in the firewall What rule I need to apply... TCP, UDP or both ports? Thank you! Upvote 0 Downvote
Hello PhoeNX Thank you very much for your answer !!!! But I'm not sure how to make the input and output rule in the firewall What rule I need to apply... TCP, UDP or both ports? Thank you!
Oct 9, 2014 #4 PhoeNX Mechanical Mar 2, 2010 869 0 16 AU TCP for both, ports 28000 and 28005, inbound and outbound Anthony Galante Senior Support Engineer NX5.0.6, NX6.0.5, NX7.5.5, NX8.0.0 -> NX8.0.3 NX8.5.0 -> NX8.5.3, NX9.0.0 -> NX9.0.3, NX10 Beta Upvote 0 Downvote
TCP for both, ports 28000 and 28005, inbound and outbound Anthony Galante Senior Support Engineer NX5.0.6, NX6.0.5, NX7.5.5, NX8.0.0 -> NX8.0.3 NX8.5.0 -> NX8.5.3, NX9.0.0 -> NX9.0.3, NX10 Beta
Oct 10, 2014 Thread starter #5 LayKanae Industrial Jul 28, 2014 23 0 0 MX Thank you !! The NX works perfectly !! Upvote 0 Downvote