Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations The Obturator on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Produce an excel report from a BOM

Status
Not open for further replies.

ProEDesigner00

Mechanical
Oct 17, 2003
203
Ladies and Gentlemen

Is there away to produce an excel file from an assembly BOM information?

I know you can produce a txt file then copy paste. I want to skip that step.

I am running WF3.

Thanks
 
Replies continue below

Recommended for you

ok we saved the file as a TXT then in excel was able to open that TXT file up............... Can I give myself a star?
 
hey did you get the mapkey running right from before?

 
Thanks guys.

Cadcamguy.........not as well as I wanted to. I imported a neu file and got rid of the few paramters not needed in each part.

I have figured out how my sawdust furnace should work and am creating some amazing heat using wet sawdust. Actually you can burn any bio fuel in it as long as its has some moisture. and its naturally aspirated! I have an order for 10 of them.

Next project is to finish the design of and build a small cnc mill. Motors were bought today.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor