Jan 27, 2010 #1 TheMan51 Automotive Feb 8, 2007 109 0 0 US In my product assembly I am attempting to project edges from one catpart to the other using "project 3-D elements" icon. The software will not allow me to choose an edge. I do believe I accomplished this feat before. Please advise. Thanks much
In my product assembly I am attempting to project edges from one catpart to the other using "project 3-D elements" icon. The software will not allow me to choose an edge. I do believe I accomplished this feat before. Please advise. Thanks much
Jan 27, 2010 #2 jackk Mechanical Nov 22, 2002 1,306 0 0 US What does the error message say? You may have turned on the "only use published geometry" in the Tools Options, Or, you might be working with a part that is out of context, or it might be something else.... Upvote 0 Downvote
What does the error message say? You may have turned on the "only use published geometry" in the Tools Options, Or, you might be working with a part that is out of context, or it might be something else....