Oct 22, 2007 #1 rossly Automotive Sep 22, 2003 115 I am needing to project a line onto a surface towards a point that is behind that surface. Is that possible? ross.
I am needing to project a line onto a surface towards a point that is behind that surface. Is that possible? ross.
Oct 22, 2007 #2 weavedreamer Automotive Aug 1, 2007 279 If not, use 2 lines from the endpoints of the curve you wish to project and sweep a surface down the two lines for your intersection. Upvote 0 Downvote
If not, use 2 lines from the endpoints of the curve you wish to project and sweep a surface down the two lines for your intersection.
Oct 22, 2007 1 #3 Azrael Automotive May 12, 2003 685 Use affinity in the transformation toolbar in the GSD module. Set the line as element and the point as origin, set the ratio to 0.1 or similar. You will now have a line. Use multi sect surf between the two line to create a surf. Use intersect between your surface and the new surface. Voila as our good frenchs would say Upvote 0 Downvote
Use affinity in the transformation toolbar in the GSD module. Set the line as element and the point as origin, set the ratio to 0.1 or similar. You will now have a line. Use multi sect surf between the two line to create a surf. Use intersect between your surface and the new surface. Voila as our good frenchs would say
Oct 23, 2007 Thread starter #4 rossly Automotive Sep 22, 2003 115 Azrael, EXCELLENT!!! Upvote 0 Downvote
