Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Propeller Cavitation in Ships

Status
Not open for further replies.
4carats

4carats

Chemical
Joined
Jun 26, 2003
Messages
29
Location
CA
Marine Engineering professionals,
Please share your valuable experience with me by replying the following questions related to Propeller Cavitation:
Q1: At what RPM (Revolution Per Minute) does cavitation start at the tip of the propellers?
Q2: What is the diameter of the propellers in Q1?
Q3: How did you notice cavitation started in Q1?
Thank you.
4carats
 
Status
Not open for further replies.

Similar threads

I
  • Question Question
Crevice corrosion in 316L threaded fitting
Replies
12
Views
17K
EdStainless
EdStainless
Kabootarman
  • Question Question
Soft Seats in Acid Gas service
Replies
1
Views
4K
SJones
SJones
V
  • Question Question
PE/PP in Concentrated Sulfuric Acid Service
Replies
2
Views
4K
Vahid.A
V
V
  • Question Question
Chloride criteria in MR0175/ISO 15156-3 for austenitic stainless steels
Replies
12
Views
15K
SJones
SJones
kondori
  • Locked
  • Question Question
Inadequate PWHT holding time for Carbon Steel piping in caustic service (NACE SP-0403)
Replies
16
Views
9K
kondori
kondori

Part and Inventory Search

Sponsor

Back
Top