Looking on the threads I found that Xcom1 had an exact issue as to what we are having. I quote "We currently anneal quite a bit of our raw CDA 260 brass and find that as we approach annealing temperatures of 900-1000 deg. F, our product dezincifies to such a great extent that no amount of mechanical or chemical finishing can make the part look correct again. Does anyone have any tips as to how to anneal 70%Cu/30%Zn brass? Thanks"
No results were ever posted. Does anyone have any suggestions to get me going in the right direction.
No results were ever posted. Does anyone have any suggestions to get me going in the right direction.
