Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

protective coatings for corrosion of steels

Status
Not open for further replies.

stuck

Structural
Mar 27, 2001
2
0
0
US
dear reader

i am 16 years old and i have a science project on prevention of corrosion.I am looking for some ways on how to prevent corrosion.Any names of paints or any other info. would be of great help.

thank you alot for reading and helping me.

thanx again

tammy
 
Replies continue below

Recommended for you

You might try some of the major paint suppliers - Sherewin Williams Industrial Coatings has a lot of technical information available. You might also try the American Galvanizers Association. I hope these leads pan out for you. These people might also have some ideas for available resources.
 
You might want to look up metaisation, its a recent process which consists of galvanising your material but through the same manner that you would paint it.
 
I have spent a number of years in the corrosion field.&nbsp;&nbsp;I would be happy to answer any questions you might have.&nbsp;&nbsp;<br>email me at <A HREF="mailto:Hscribner@henkelsandmccoy.com">Hscribner@henkelsandmccoy.com</A><br><br>Good Luck!!
 
Status
Not open for further replies.
Back
Top