Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Protective coatings for Optical Applications

Thread starter ganpule
Start date Oct 7, 2002

Status: Not open for further replies.

Oct 7, 2002

ganpule

Chemical

I am looking for protective coatings for LCD applications. These coatings have to be able to withstand the following two post processing steps: (1) Sputter overcoat of SiO2 and ITO where temperatures reach as high as 300 C IN VACUUM for about 5 minutes, (2) ITO etching step where the coating gets exposed to 30% HCl for about 1 minute.

Any help would be highly appreciated.

Thanks,