ProWEB

[3dlogix]

I need to have assemblies published to a web page, with images and BoM. I have not had too much success with ProWEB publish, it seems that a api file is missing.

Anybody have some suggestions?

http://www.3dlogix.com

 

[im4cad]

Why don't you use JPEG or TIFF files created from your assemblies? im4cad
Pro Design Services, Inc.

http://www.cadproe.com/pds/home.asp

 

[3dlogix]

I want the model tree to show as well.

http://www.3dlogix.com

 

[im4cad]

You can use "Print Screen", and you'll be able to see the model tree, and everything from your screen. im4cad
Pro Design Services, Inc.

http://www.cadproe.com/pds/home.asp

 

[mloew]

3dlogix,

To elaborate further on im4cad's post: Windows operating systems will create a device independent bitmap (.bmp) image of either the current widows (Alt+Print Screen) or the entire screen (Ctrl+Print Screen). The keystrokes place the appropriate image into the clipboard and can be placed into documents by the paste command (Ctrl+v).

There is another software tool called Snagit (

http://www.techsmith.com/products/snagit/default.asp)

that I have seen demonstrated, but not used personally. I am sure there are many others. Google.com produced many other hits when I used the keywords: device independent bitmap alt print screen (

http://www.google.com/search?sourceid=navclient&q=device+independent+bitmap+alt+print+screen)

Good luck! Best regards,

Matthew Ian Loew

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.

 

[3dlogix]

Thanks for your help, but I need more info on ProWEB Publish. I dont want static images, that I can do with SnagIT or any other screen capture.

I want to configure ProWEB but am having a difficult time to set up the html pages, I followed PTC installation guide and help files in their knowledge base, but didnt succeed.

Any help would be appreciated.

http://www.3dlogix.com