Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Publication out of Print - Applying Design Loads to Pre-Eng. Buildings

Thread starter Philitup
Start date Apr 9, 2003

Status: Not open for further replies.

Apr 9, 2003

Philitup

Structural

Hello Everyone,

I am seeking a publication from the CSSBI ( Canadian Sheet Steel Building Institute) entitled:

CSSBI B15-93 Snow, Wind and Earthquake Load Design Criteria for Steel Building Systems.

It is a small booklet about 15-18 pages and shows a designer how to apply snow, wind and seismic loads to pre-engineered buildings.

If anyone has an extra copy or can fax me a copy, I would be most grateful.

Regards,

Phil Nolan, P. Eng.