Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

pull out test- bond slip-transfer loads b/w concrete and rebars

Status
Not open for further replies.
raeisif

raeisif

Civil/Environmental
Joined
May 29, 2014
Messages
5
Location
CA
Hi every one,
I want to model the bonding between concrete and rebar using bond-slip concept.
in other words, I need to see how the force transfers to rebar exactly after the concrete cracks.
would you please guide me as I am new to Abaqus.
Bests
 
Status
Not open for further replies.

Similar threads

R
  • Question Question
Cohesive Zone Modeling of FRP Pull-Out Test in Grooved Concrete – Best Approach for Adhesive Layer in Abaqus?"
Replies
4
Views
4K
FEA way
FEA way
R
  • Question Question
Zig-Zag Strain Pattern in NSM FRP Pull-Out Simulation (Cohesive Zone Model) – Need Help
Replies
2
Views
9K
Roshaan
R
V
  • Locked
  • Question Question
Tensioned element and loads
Replies
2
Views
1K
valbe
V
Zain_117
  • Locked
  • Question Question
ABAQUS Bond Stress vs Slip in a prestressed concrete beam with strand
Replies
4
Views
331
Zain_117
Zain_117
S
  • Question Question
Stress values are more compared to experimental results and cracks are not formed on concrete for DOUBLE PUNCH TEST simulation in abaqus software
Replies
7
Views
5K
Shreyas M
S

Part and Inventory Search

Sponsor

Back
Top