Pulling Code from Modicon 84

[phill92]

I have an old Modicon 84 along with the P370 controller. I was wondering if anyone knew how to pull the code off that is being run on the Modicon 84. I plugged in the P370 controller but nothing seemed to happen. I have limited knowledge of PLC's so if anyone has any suggestions I would greatly appriectaite it.

 

[modiconbob]

To download the program from a Micro 84, you will need the P370 plus a P371 program pack. Depending upon the memory size you would need a 001 or a 002 (iK or 2K).

Bob

http://www.deltaautomation.com