JoelTXCive
Civil/Environmental
- Jul 24, 2016
- 930
I'm curious to see how people call out FRP gratings on their plans.
I'm very familiar with steel grating and it's easy to call out on the plans: "HDG Type 19-4 Grating with 1 1/2" bearing bars" etc. etc..
Once you get into the FRP and plastics, it seems to get more complicated; and it seems there are a lot of proprietary products on the market.
The grating I found that will work is "McNichols MS-I-6515 Duradek."
I'm not sure I can call out a specific manufacturer on this plan set, so I'm looking for a generic callout/specification.
Thank you in advance.
Joel
I'm very familiar with steel grating and it's easy to call out on the plans: "HDG Type 19-4 Grating with 1 1/2" bearing bars" etc. etc..
Once you get into the FRP and plastics, it seems to get more complicated; and it seems there are a lot of proprietary products on the market.
The grating I found that will work is "McNichols MS-I-6515 Duradek."
I'm not sure I can call out a specific manufacturer on this plan set, so I'm looking for a generic callout/specification.
Thank you in advance.
Joel