suren12564
Mechanical
What will happen when air is entrapped in a centrifugal pump? And if air is entrapped in pipe line loop?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Pump
- Thread starter suren12564
- Start date
- Status
LittleInch
Petroleum
The pump won't work at all or badly until the air is flushed out.
Ditto for the piping.
You usually need about 1 to 1.5 m/sec velocity to "sweep" out air in pipes.
Very vague question so a general response.
Do you have a more specific issue / problem?
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
Ditto for the piping.
You usually need about 1 to 1.5 m/sec velocity to "sweep" out air in pipes.
Very vague question so a general response.
Do you have a more specific issue / problem?
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
- Status
Similar threads
- Locked
- Question
- Locked
- Question