Putting configuration information on a drawing

[nickjb]

I'm not a big fan of configurations but I'm giving them a go. I've created a set of 18 identical parts except for one dimension which is different in each configuration. I want to create a single drawing with a cutting list. I want to put 'dim "A"' on the drawing then have a table listing each length dim "A" could be. Is this possible/easy? SW 2009 SP5

 

[CorBlimeyLimey]

Yes, it is easy. You could use a General Table and add the information manually, or you could insert the Design Table into the drawing. See Help for how to manipulate the DT prior to inserting.

http://help.solidworks.com/2010/Eng...tion/displaying_a_design_table_in_drawing.htm