Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Quality Air Reciever Fabrication and Welding --

Status
Not open for further replies.

MJCronin

Mechanical
Apr 9, 2001
5,097
Quality Air Reciever Fabrication and Welding --


Your thoughts on this YOUTUBE Video ?
 
Replies continue below

Recommended for you

The bearded welder had closed-toe shoes, so they have a safety program.

They did a leak check, so they have a quality program.

They got raw materials, so they have vendor qualification.

What else do you want?
 
If after 6 months of full service no problems have occurred, no calculations, WPS, welder qualification, final data book, etc. are required. This is best practice in many places.
If not. all workers will be hanged.
 
Well, I admire the industriousness, but that's all :)
 
Huh, no signature. Something else to puzzle out I suppose...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor