Hi everyone!
I'm working on a spreadsheet for compute soil bearing capacity according to Hansen's method, and checking my spreadsheet with the examples given at Bowles (5th edition) I have some differences, and I can't understand where is the difference of the results. Also I've been trying to find the codes of the softwares that are used in the textbook, but so far I haven't found anything. Here are my values of q[sub]u[/sub], and what it should be according to Bowles textbook (Table 4-6).
D= 0.5 m
B = 0.5 m
L = 2.0 m
γ = 17.06 kN/m[sup]3[/sup]
ϕ = 38.5 (40.75°)
c = 7.8 kPa
q[sub]ult[/sub] (Bowles- Hansen method): 23.7 kg/cm2
q[sub]ult[/sub](My spreadsheet - Hansen Mehtod): 21.3 kg/cm2
Results:
I would really appreciate your help.
I'm working on a spreadsheet for compute soil bearing capacity according to Hansen's method, and checking my spreadsheet with the examples given at Bowles (5th edition) I have some differences, and I can't understand where is the difference of the results. Also I've been trying to find the codes of the softwares that are used in the textbook, but so far I haven't found anything. Here are my values of q[sub]u[/sub], and what it should be according to Bowles textbook (Table 4-6).
D= 0.5 m
B = 0.5 m
L = 2.0 m
γ = 17.06 kN/m[sup]3[/sup]
ϕ = 38.5 (40.75°)
c = 7.8 kPa
q[sub]ult[/sub] (Bowles- Hansen method): 23.7 kg/cm2
q[sub]ult[/sub](My spreadsheet - Hansen Mehtod): 21.3 kg/cm2
Results:
I would really appreciate your help.
