"built-in shape memory model: advice sought"

[maxwolf2011]

hello all user

according to answer id 4699 (I get it at abaqus.custhelp.com ), I create a Calibration in Abaqus/CAE from the Model Tree (pic1)
then I have a few problems :

1 - First I have to define material and then define calibrations or first define calibration and then define material ?? (pic 1)

2 - I want strees-strain data set ( .txt file) in calibration ,Where can I find? (pic 2)

3 - when click the Update viewport button for Select the Plastic points, there is an error that says :" Plot cannot be updated in the current viewport " (pic 3)

4 - do not show plot strees-strain, just show points ,why ? (pic 4)

5 - define nitinol material according to ansewr id 4699,is that correct? (pic 5)

all picture 1-5 are below.

http://files.engineering.com/getfile.aspx?folder=ebb9b28b-4263-4e14-af01-fdd6d35889cd&file=pic_1.jpg

http://files.engineering.com/getfile.aspx?folder=bd21f277-9e33-47b0-b82e-4480b38a4dea&file=pic_2.jpg

http://files.engineering.com/getfile.aspx?folder=1b23b827-41a6-41ea-a03b-d70bfe1de79f&file=pic_3.jpg

http://files.engineering.com/getfile.aspx?folder=734fb56a-a6de-404b-9d9c-df6c1afcc065&file=pic_4.jpg

http://files.engineering.com/getfile.aspx?folder=77da15ae-5738-4177-ac07-2b553121d435&file=pic_5.jpg

please help me
thanks for giving some of ur time for this question.
Best regards
max