Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

"PAN-Bronze 220" shear strength

Status
Not open for further replies.
vonlueke

vonlueke

Structural
Dec 2, 2001
270
Could anyone tell me the ultimate shear strength of a metal alloy supposedly called "PAN-Bronze 220"? This might be a name used in Germany. Or it might also be called "AlMBz. 220." I'm pretty sure the tensile ultimate strength is 650 MPa. The tensile yield strength would also be appreciated. Does this alloy have an equivalent name in MIL-HDBK-5H or some other document? Thanks.
 
Status
Not open for further replies.

Similar threads

enginesrus
  • Question
What brass or bronze for water couplings?
Replies
9
Views
5K
Brooke William
B
just_some_shmuck
  • Locked
  • Question
Steel mill terminology: "weld repair" - Do mills repair defects?
Replies
6
Views
233
Ng2020
Ng2020
Zeyneb
  • Locked
  • Question
Mitigate strength reduction when welding after heat treatment 1
Replies
12
Views
255
TugboatEng
TugboatEng
marcello1983
  • Locked
  • Question
HOT TAPPING - GAS PIPELINE - 52" - 42"
Replies
7
Views
116
MJCronin
MJCronin
chrysa1975
  • Locked
  • Question
ASTM A333 GRADE 6 Q&T WITH HIGH YIELD AND TENSILE STRENGTH FOR SOUR SERVICE 1
Replies
10
Views
277
SJones
SJones

Part and Inventory Search

Sponsor

Back
Top Bottom