Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

QW-321.2 Immediate Retest Using Mechanical Testing

Status
Not open for further replies.
sftyvlv1

sftyvlv1

Mechanical
Joined
Oct 25, 2018
Messages
48
Location
CA
How would I apply this paragraph to a 6g pipe test?
Would I have the welder weld out a new test or root an entire test, fill and cap the section that failed?
What should happen?
 
Sort by date Sort by votes
The welder must complete two full 6G test coupons and both must pass mechanical testing.
 
Upvote 0 Downvote
Thanks, much appreciated.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

timsch
  • Locked
  • Question Question
Scale consideration with ultrasonic wall thickness testing
Replies
8
Views
2K
timsch
timsch
C
  • Locked
  • Question Question
Viscous Fluid Selection for AODD Pump Performance Testing
Replies
9
Views
3K
Doug Hunter
Doug Hunter
K
  • Question Question
select a suitable material for the tank used to store demineralized water before hydro testing.
Replies
4
Views
8K
pierreick
pierreick
jwpyr8
  • Question Question
Using a backpressure regulator to maintain a minimum pressure
Replies
18
Views
2K
jhnblgr
jhnblgr
nikolastrojman
  • Locked
  • Question Question
Mechanical characteristics for pipeline material at elevated temperatures
Replies
1
Views
1K
LittleInch
LittleInch

Part and Inventory Search

Sponsor

Back
Top