Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

radiotrunslucency

Status
Not open for further replies.
tony1234

tony1234

Mechanical
Dec 20, 2004
17
0
0
US
Can anyone tell me what it means to xray to <2.0 mm Aluminum?
I have a material that I need to have tested that when under xray must not exceed this amount.
I do know that the machine used to do it is an 80kV unit.
 
Status
Not open for further replies.
Back
Top