May 27, 2014 #1 asimpson Mechanical Aug 6, 2010 300 IE I need Al and S/S foil parts cut from less than 0.25 mm (0.001") about 20 mm x 30 mm Any laser cutting people I talked with dont go below 0.5 mm . Anybody know of campany that could supply 100 parts on a quick turn around? Thanks
I need Al and S/S foil parts cut from less than 0.25 mm (0.001") about 20 mm x 30 mm Any laser cutting people I talked with dont go below 0.5 mm . Anybody know of campany that could supply 100 parts on a quick turn around? Thanks
May 27, 2014 2 #2 CoryPad Materials Apr 15, 2002 5,192 US http://www.photofabrication.com/ http://www.conardcorp.com/ Upvote 0 Downvote
May 27, 2014 #3 Timelord Mechanical Dec 18, 2002 454 US CoryPad has got the answer (a star for him), photofab it. By the way, .25mm is more like .01 inches Upvote 0 Downvote
May 27, 2014 #4 hendersdc Mechanical Feb 27, 2008 526 US We have had good luck with these guys before when we needed a quick turn around: Thin Metal Parts Doug Upvote 0 Downvote
We have had good luck with these guys before when we needed a quick turn around: Thin Metal Parts Doug