Raster view problems in R17 (on x64)

[solid7]

R17 SP04 (64 bit)
Windows XP x64 edition
Intellistation A Pro 6224
4GB RAM / processor (2)
Quadro FX3000 (latest drivers)

I am trying to create an isometric view in raster mode. However, when I attempt to do this, I get a "view cannot be created" error every time. It does not matter what I set the detail level to - even the lowest custom settings fail.

I'm guessing this must be related to the hardware, as I've created this exact same view in the past on a 32-bit machine. Anyone have similar experiences?

Thank you.

-----------------------------------------------------------
Catia Design|Catia Design News|Catia V5 blog

 

[itsmyjob]

May be you can open a PMR...

Eric N.
indocti discant et ament meminisse periti ​

 

[solid7]

I was just thinking I would do that. There's no way that this isn't a bug or some other unaddressed setup issue.


-----------------------------------------------------------
Catia Design|Catia Design News|Catia V5 blog

 

[wolfgrrl]

Had you tried to CATDUA the offending file(s)?

 

[cadddict]

solid7

Am having the same trouble with 32bit version as well...R17SP03

 

[solid7]

Had you tried to CATDUA the offending file(s)?

No, because there is no offending file. This is an equal opportunity error. (at least for me)

I have submitted a PMR.

-----------------------------------------------------------
Catia Design|Catia Design News|Catia V5 blog