Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Rating of ISOLATOR in ETAP
- Thread starter 28021984
- Start date
- Thread starter
- #2
Dear Sir
I want to using 220kV system. I want to give the 220kV rated voltage for Isolator in ETAP Software
normally max. allowable voltage in the etap settings are 34.5kV.
Can u please help me how to give the 220kV for an Isolator in Etap.
In this regard please find attached documents
I want to using 220kV system. I want to give the 220kV rated voltage for Isolator in ETAP Software
normally max. allowable voltage in the etap settings are 34.5kV.
Can u please help me how to give the 220kV for an Isolator in Etap.
In this regard please find attached documents
ETAP has great tech support. They would be the best resource. Most software allow adding a custom device as well.
Rafiq Bulsara
Rafiq Bulsara
- Status
Similar threads
- Locked
- Question
- Locked
- Question