_malek
Mechanical
- Dec 10, 2018
- 9
Dear eng-tips members,
I’m planning to use RC servo Motor Model No. FT5325M or FT5835M
And the application is a durability test rig for a new product.
The operation of the servo is designed to work as follows:
1. The axe of motor is hooked up with a 3 RFID cards wheel with weight of 42 Grams and maximum length 154 mm from center.
2. Moving for 45 Degree and return to zero degree (10 k repeated movement) (21 Hours duration) (8 movements per minute).
3. This movement is expected to sustain for days of operation.
Please advise which motor to select.
Also Please Advise is it ok to use RC Servo in industrial Application.
Thank You All.
Malek
I’m planning to use RC servo Motor Model No. FT5325M or FT5835M
And the application is a durability test rig for a new product.
The operation of the servo is designed to work as follows:
1. The axe of motor is hooked up with a 3 RFID cards wheel with weight of 42 Grams and maximum length 154 mm from center.
2. Moving for 45 Degree and return to zero degree (10 k repeated movement) (21 Hours duration) (8 movements per minute).
3. This movement is expected to sustain for days of operation.
Please advise which motor to select.
Also Please Advise is it ok to use RC Servo in industrial Application.
Thank You All.
Malek
