Re-Alignment of Part - Inventor 2011 1

[21Pom]

Hi All,

Got a problem. I have an RHS beam that I cut a 'V' shape into the bottom not up to the inside of the top face, and then bring the sides together.

To do this most effectively I bend both sides. This puts them both at an angle to the horizontal plane. Is there an easy way to get one of the side parallel to the horizontal again. I've tried using the Orbital tool but this is a pain.

Best Rgds,
Dave R.

 

[rollupswx]

Attach the file here.

 

[21Pom]

Hi rollupswx,

File attached and my best attempt to get the LHS level.

Best Rgds,
Dave R.

 

[EngAddict]

rotate solid?..

 

[21Pom]

Hi EngAddict,

Got it - thanks for that.

Best Rgds,
Dave R.