Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Reading hydraulic schematic
- Thread starter Chris W
- Start date
This is a LS-valve from HAWE, PSV-3 or PSV-5. The symbols are a bit complex, yes, but it's just a typical LS-valve with inflow compensator and LS A/B relief valves to reduce the pressure out on some functions.
Valves no 4 and 5 from left have A/B to T in neutral, typically for operating something with a counterbalance valve or possibly a motor.
Valves no 4 and 5 from left have A/B to T in neutral, typically for operating something with a counterbalance valve or possibly a motor.
- Status
Similar threads
