Reference book or handbook for corrosion rate 1

[etsen]

Could anyone recommend reference books or handbooks or other available and believable materials about corrosion rate to determine corrosion allowance for pipe and pressure design? Thanks a lot.

 

[strider6]

it depends on the service..
a general database for chemicals and fluids id the Cor-Sur of Nace that you can access at Knovel website.

http://www.knovel.com/web/portal/basic_search/display?_EXT_KNOVEL_DISPLAY_bookid=532

here you can find corrosion rate for almost everything.

then there are a lot of books..
Handbook of Corrosion Data ASM

http://www.normas.com/ASM/pages/6407.html

these sources can give you advice for corrosion rate but you should be aware that you have to know how to use these data..and how to evaluate the corrosion mechanisms active in your process..

S.

S.

Corrosion Protection & Corrosion Control

 

[EdStainless]

The Compass Corrosion Guides are pretty good, but basic.
There are a number of good ones from AMS depending on your specific field of interest.

= = = = = = = = = = = = = = = = = = = =
Plymouth Tube

 

[EdStainless]

Don't forget to check to see what is available through NACE.

= = = = = = = = = = = = = = = = = = = =
Plymouth Tube

 

[davefitz]

Try the "corrosion handbook" by Outo Kumpu ( formerly sandvik) for a european outlook. Free of charge.

<

http://www.outokumpu.com/pages/Page____20240.aspx>

 

[HEBERTJL]

Depends on the type of fluid
which is in your pipe.

One of the most complete : dechema corrosion hanbooks,
if you can afford them.

If you use Stainless steel, ask directly to steel manufacturers.

rgds
jean-luc