May 28, 2013 #1 prsyam Mechanical Nov 30, 2012 24 0 0 SA Is there something like F4 in Excel at least in the draft environement Thanks in advance
May 28, 2013 #2 Kenny_G Mechanical Jan 29, 2003 190 0 0 US Most commands stay active until you pick another one, so there should not be many opportunities to use a command such as that... View commands do not interrupt other commands. You may try asking here: http://community.plm.automation.siemens.com/t5/Solid-Edge/ct-p/solid-edge Ken G. http://grundey.blogspot.com Upvote 0 Downvote
Most commands stay active until you pick another one, so there should not be many opportunities to use a command such as that... View commands do not interrupt other commands. You may try asking here: http://community.plm.automation.siemens.com/t5/Solid-Edge/ct-p/solid-edge Ken G. http://grundey.blogspot.com