replacing stacked fractions with "regular" text

[IFRs]

For MText, how can I globally replace those pseky stacked fractions? For instance, I need to replace {H0.7x;\S3#8;} with 3/8 but Find won't do it.

 

[OZZY84]

well, Acad 2008 find & replace will Not change {\H0.6878x;\S1/2;} to 1/2


ToolPac's

Mtext -> Find & Replace Will change {\H0.6878x;\S1/2;} to 1/2

Intel P4 3.0 GHZ
512 DDRAM
Win 2000 Pro
Autocad 14, 2002 with EP 2.3.1
Autocad 2008

 

[IFRs]

Ozzy - Does MText Find work on a large selected set of text? Going through the find/replace one at a time is futile...

 

[lpseifert]

You can find Stripmtext.lsp here, it will unstack fractions.

http://cadabyss.wordpress.com/2007/04/01/stripmtext-v309/

____________________
Civil 3D 2008, Terramodel

 

[chicopee]

Isn't there an unstack selection when you Mtext? I am out of the country and I don't have my ACAD w/ me however I think you can unstack if you highlight the value and right click on the highlighted value and keep it unstack ubtil you reverse your selection.

 

[IFRs]

There are several options for fixing this one at a time but I'm trying to fix many drawings with lots of stacked fractions in MText in each. I'll try StripMText from lpseifert and report back. Thanks all!!!

 

[Exxit]

Hi,

i knowe one tool, which can replace stacked fractions.
But it's a german tool (mnu and *.vlx).

http://www.cadmaro.de/downloads/freeware/bw_finrept.html

Install the programm, make a support path, load the mnu...
I can help with the translation.

Lothar

ADT 2004