Has anyone had experience with modifying asbestos-cement pipe? Specifically, I'm looking for a way to cut into a 10" AC line (non-potable water) and install a new flanged flowmeter, isolating one side with existing valves and the other with a water stop. I've seen AC pipe removed and replaced, but that is not an option here.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
Retrofitting AC pipe
- Thread starter gunga
- Start date
aussiemike
Chemical
I'm not sure if I fully understand the problem.
Are you saying you cannot scour the line and you need to cut into it while it is full?
If you are simply after a suitable flanged adaptor for AC pipe, try Baker or Straub. They have clamp on flanged fittings for most types of pipe.
Cheers
Are you saying you cannot scour the line and you need to cut into it while it is full?
If you are simply after a suitable flanged adaptor for AC pipe, try Baker or Straub. They have clamp on flanged fittings for most types of pipe.
Cheers
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question