Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Reused sketches in different configurations.

Status
Not open for further replies.

SWscience

Mechanical
Joined
Jun 1, 2004
Messages
77
Location
IR
I have some bad errors in this case.
I have reused some sketches in different features which supperesed or unsuperessed in configurations.
BUT when I load a configuration, it loads its own features plus reused sketches in other features which arn't belong to this config, so other features going to be unsuppress !
So my configurations aren't useful.
What should I do ?
Maybe you don't see these errors in afew number of configurations which you make to test but I have this error badly !
 
You have somehow made a relationship between the 2. You will need to find the relationship and break it. Because what happens is you now have a Parent/Child relationship. You must sever the connection (Relationship) and then the child will be free of it's parent.

Regards,

Scott Baugh, CSWP [pc2]
3DVision Technologies


faq731-376
faq559-716 - SW Fora Users
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top