Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Reverse demulsifier compatible with discharge to sea ?

Status
Not open for further replies.

SILVERSTONE

Petroleum
Sep 29, 2005
15
0
0
FR
Dear sirs,

I'm presently working on a new installation in Africa dedicated to treat (de-oiling) the process water coming from the oil production.
After having been treated (in order to reach a residual 15 ppm oil concentration) this water is directly discarded into the sea (maximum water discharge flowrate = 2000 m3/h).

A major point is that, in the treatment process, we have to use a reverse demulsifier (deoiler)which will be injected in the process water (normal concentration = 25 ppm, maximum concentration = 50 ppm).

My question is : does an "ecological enough" reverse demulsifier exist to allow the direct discharge into the sea ?

I thank you all for your attention.

Best regards,
 
Replies continue below

Recommended for you

Status
Not open for further replies.
Back
Top