Jan 26, 2005 #1 gib2j Marine/Ocean Oct 20, 2004 26 is it possible to do a reverse fillet? ie on the inside of a corner of cut plate create a mousehole instead of adding material as a normal fillet will do...
is it possible to do a reverse fillet? ie on the inside of a corner of cut plate create a mousehole instead of adding material as a normal fillet will do...
Jan 30, 2005 #2 Sirius2 Mechanical Dec 15, 2002 67 Just guessing, but it may need to be a swept profile. 3d sketch a curve if necessary... I dunno, Im no expert. Never heard of a reverse fillet style operation before, but I suppose having an undercut tool would have its places sometimes!. I'll leave it to the experts to answer, my guess is no, and a path cut will be required. Sirius2 Upvote 0 Downvote
Just guessing, but it may need to be a swept profile. 3d sketch a curve if necessary... I dunno, Im no expert. Never heard of a reverse fillet style operation before, but I suppose having an undercut tool would have its places sometimes!. I'll leave it to the experts to answer, my guess is no, and a path cut will be required. Sirius2
