Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Revit sloped level.

Status
Not open for further replies.
Elindio1

Elindio1

Structural
Oct 13, 2006
21
0
0
PR
I'm new to REVIT 2008 structural and I have the following question. How can you set a level slope. For example, a roof level with high point 21' and low point 16'.
I do not seem to find how to do it. Thanks
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Status
Not open for further replies.

Similar threads

SPR Baker
  • Locked
  • Question
2 Difference Level Slab on Beam
Replies
1
Views
3
M.Honda
M.Honda
SPR Baker
  • Locked
  • Question
How to model beam with 2 different slab level in Etabs
Replies
5
Views
7
M.Honda
M.Honda
Michael_92
  • Locked
  • Question
Add walls/columns on the level the start
Replies
1
Views
2
Trenno
Trenno
andrew17
  • Locked
  • Question
4 Level addition to concrete building
Replies
0
Views
1
andrew17
andrew17
Ahmad Alhamad
  • Locked
  • Question
how to module 2 slabs with small levels differences
Replies
0
Views
1
Ahmad Alhamad
Ahmad Alhamad
Back
Top