Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

RFI filter - selection of inductor

Status
Not open for further replies.

hrc

Electrical
Nov 8, 2001
104
Taking a typical triac circuit for dimming AC lights, is the selection of the inductor for the RFI filter (typically stated to be between 40uH and 100uH) just related to the current capacity and saturation, or is there something different in the selection process. I was looking at using a API Delevan as shown in Digikey p/n DN4508-ND, 47uH @4.45A
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor