Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

right click

Status
Not open for further replies.

pedromorgan

Mechanical
Jul 23, 2006
14
GB
Hello folks

I have just upgraded from R14 to 2006 and i am having a bit of a culture shock!

One thing i really liked about R14 that has changed is the right click. i now have this menu pop up when all i want to do is press enter.
is there any way of changing this?
What do other people do? do they use the menu?

Now a question from a thickie! is it worth getting a fancy mouse with more buttons? would i be able to have one button for enter and another for the menu? what do you use?

Thanks in advance.

Peter
 
Replies continue below

Recommended for you

In the TOOLS >> OPTIONS, click on the USER PREFERENCES and the right click options are there.

"Everybody is ignorant, only on different subjects." — Will Rogers
 
That was a bit of an annoyance here too, until I changed the settings. I have really gotten hooked on the time sensitive right click.

Standard right click I use for enter, hold down right click for options box, or <control> right click for osnaps box. Definitely one of my favorite additions.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top