Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Rollover stability of the vehicle M3 class I

Status
Not open for further replies.

dandorin

Automotive
Nov 21, 2004
2
Hello everybody!

Can anybody tell me where can I find a method for calculating the stability for rollover of the vehicle category M3, class I (city bus), according to paragraphs 7.4.1, 7.4.5, 7.4.5.1,2,3,4,5,6 and 7 from Directive 2001/85/EC?

Thank you all very much in advance.
 
Replies continue below

Recommended for you

It would have been nice to include a link!


I could do it but it would take a reasonably long time, by hand, and would not necessarily be acceptable to the technical service, as they call it. Your best bet is to ask them directly, or via your legal/homologation group.

There are several gotchas not mentioned in that document, and frankly I would allow a 20% error margin.




Cheers

Greg Locock
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor