Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Roof Maintenance Question?
- Thread starter Antnyt23
- Start date
When less than 6-ft of the 'edge' tie-off is mandatory. I would interpret the 'edge' to be either the outer edge or centerline of the parapet. I could defend my choice of 'centerline' easier than 'edge' when in an OSHA audit.
Low parapet equals 'no protection' in OSHA.
Low parapet equals 'no protection' in OSHA.
- Status
Similar threads
- Locked
- Question
- Locked
- Question