Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Rotate an IGES solid in Pro/E WF3
- Thread starter slorant
- Start date
If you go to View Manager, you can select the Orientation tab. Start a "new" orientation (top left button). A user interface will pop up and it should say Type with a drop down box: select dynamic orient.
You should see a box with a pan scroller, some misc buttons, and a "Spin" area. Use that spin area to define the rotation about which ever axis you prefer, and what ever angle you need. It might take some playing around with, like anything else in ProE, but eventually you should get what you want.
Once you hit "OK" you'll have a view saved in the list, so you can easily go back to it at any time.
I hope this helps!
You should see a box with a pan scroller, some misc buttons, and a "Spin" area. Use that spin area to define the rotation about which ever axis you prefer, and what ever angle you need. It might take some playing around with, like anything else in ProE, but eventually you should get what you want.
Once you hit "OK" you'll have a view saved in the list, so you can easily go back to it at any time.
I hope this helps!
- Status
Similar threads
- Locked
- Helpful tip
- Locked
- Question