jjuanR
Mining
- Sep 19, 2021
- 1
Hi, I'm currently looking into rotolining processes, specifically HDPE with carbon steel pipe. My question concerns the geometrical limitations for this kind of manufacturing. I found this blog which has nice information but no reference whatsoever. I would prefer having some manufacturer handbook, standard, published article or something, so that we have a robust reference on which to base our design decisions.
For more details, I would specify that we are looking at pipes with diameters lower than 4" for our system. The system includes 90-deg bends and we are concerned with the design radii as they could be too small. This is what droves us to search for this information.
Any help would be greatly appreciated!
For more details, I would specify that we are looking at pipes with diameters lower than 4" for our system. The system includes 90-deg bends and we are concerned with the design radii as they could be too small. This is what droves us to search for this information.
Any help would be greatly appreciated!